What size string does Ryobi weed eater take?

The head of the Ryobi 40V EXPAND-IT String Trimmer is a traditional bump feed design and uses 0.080” line. A couple lengths of line are included, but any trimmer line of the same size will work.

Is all weed eater string the same?

As previously mentioned, not all sizes fit all trimmers, so make sure to consult your trimmer’s manual before purchasing string for your trimmer. For small to medium yards with few weeds, a light-duty weed-eater string with a diameter of . 065 to . 085 inch is suitable.

What kind of weed eater string do I need?

For light work, such as trimming grass, 0.065″-0.085″ should be sufficient. For thicker grass and weeds, a line in the 0.085″-0.110″ range will get the job done, and for thicker underbrush, anything thicker than 0.110″ will work.

What kind of string do you use for a weed eater?

What can I use instead of weed eater string?

My favorite alternatives to string trimmers are hand trimmers, brush cutters, and lawn shears. All three of these tools have their own strengths and weaknesses but they can all be used to give the edges of your lawn that crisp and clean look.

Can you use any weed eater string?

Is all string trimmer line the same?

String trimmer line comes in a variety of shapes: round, twisted, square, star shaped, and serrated. Rounded line is the most common type available, but it because it lacks a cutting edge, it rips the grass rather than cutting it. Twisted line is a bit better, as the shape has a little more of a cutting edge to it.

What size string does an Echo weed eater use?

.095-inch
It uses dual . 095-inch cutting lines.

Is Ryobi a good brand of Weed Eater?

Ryobi is moving toward cordless trimmers, but they do still have a gas-powered weed eater if you prefer this type of trimmer. If you live in an area where grass and weeds grow almost faster than you can keep up with them, then we recommend this gas-powered Ryobi. It cuts through tall grass and weeds like butter.

How to restring a double string bump feed Weed Eater?

Select Your Line. Select your line based on what your trimmer’s user manual suggests.

How do I remove a Ryobi Trimmer string Assembly?

– Turn off the Ryobi trimmer. – Hold the spool of line in one hand and rotate the bump knob counterclockwise. – Remove the knob. – Let the trimmer come to a complete stop. – Locate the two opposite tabs on the sides of the spool retainer. – Pull up on the old spool to remove it.

How to adjust the idle on a Ryobi Weed Eater?

– Verify carburetor is set to stock settings: – Start bike, bring to operating temperature. – Set idle speed adjusting screw, clockwise to increase rpm, counter-clockwise to decrease rpm. – Adjust idle mixture by turning idle mixture screw slowly clockwise until the engine runs poorly.