How do you change the tune on AutoCal?
How do you change the tune on AutoCal?
Registered. Plug your tuner into the OBD-II port and turn the key to run with the engine off. Scroll down until you come to the section of tunes that begin with “Full” not “Program”. The program options will give an error and will not flash the vehicle, you must use the Full tunes.
How do I know if my AutoCal is locked?
How do I know if a Controller is Locked?
- Connect FlashScan/AutoCal to your PC and vehicle.
- Open the V8 Scan and Tune Tool software.
- Navigate to the [F3: Tune] -> [F2: Read] menu and [Auto Detect] the controller.
- On the Lock/Unlock tab, select [Status] to display locking status.
How do you read codes in AutoCal?
Registered. Plug it into the OBDII port, turn your ignition on – 2 clicks – scroll down to read DTC and press ok. It will list all your codes. To clear codes, scroll down one more and select clear DTCs.
How do you read codes in autocal?
How do I put the stock tune back on my EFI live?
Use the EFI Live explorer to copy your stock tune file from the “read” file in the program to your desktop. E-mail this file it to your tuner so they can re-save the stock file you took off your truck into a flash tune file. This new tune file will be a stock file that you can now flash to the truck.
How install EFI Live tune on AutoCal?
- Step 1: EFILive Scan and Tune. Make sure you have the most up to date EFILive software downloaded to your Windows Computer.
- Step 2: Updating your AutoCal or V2.
- Step 3: Updating your BBX Setting.
- Step 4: Downloading EFILive Tunes to your.
What are the 5 tunes on EFI live?
It includes 5 custom tunes for a DSP5 switch so that you can switch between tunes while driving. Our tunes are opt.stock, tow (w/ turbo braking), street, hot and race. Please specify in the stated area if you want any other specific tunes.
Does EFILive unlock ECM?
To reduce lead times for tuners sending ECM’s off site to be unlocked, EFILive has added an option to unlock selected controllers by trying every possible key in a defined range for selected controller types.
Is AutoCal Vin locked?
AutoCal is locked to tuner and V.I.N., as I understand it, maybe Phil at Anarchy Diesel will chime in with clarification. A new V-2 comes with two V.I.N.’s, if the owner has only used one then you will only need to buy the tune.
How install EFILive tune on AutoCal?
What is EFILive AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. And for their customers to collect and submit logged data back to the tuner for analysis.
How do I update my autocal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
Do you need to flash to stock before loading a new tune?
Registered. if you are using cobb it’s not necessary. your stock tune is stored in the device when you install the tuner and flashing a new tune loads a completely new tune. In other words, flashing with a cobb ap is not influenced by the current tune loaded on the car.
What is the difference between FlashScan and AutoCal?
Differences between FlashScan and AutoCal AutoCal, only the tuner has that ability. AutoCal cannot be used to create or change tune files. Tunes from multiple sources can be flashed with FlashScan, however AutoCal is limited to flashing tunes provided by a single tuner.
How much horsepower does EFI Live add?
A basic tune to add 100 hp or so can be accomplished by changing only five or six tables in the engine’s software calibration. Where EFILive really shines is tuning a modified truck to run like a stocker.
How much torque does EFI Live add?
Registered. we usually set them up with about 1.5x torque compared to HP. so on a 100hp tune, youd see about 150 ft lbs.
