Is Aldila a good shaft?

Much smoother and easier to load. It was a stiff flex like I normally play, but just felt really good. On the tee box I found this shaft hit higher than the stock shaft, but spin was still about the same. While I didn’t have an accuracy problem with the stock shaft, the Blue was just a little tighter yet.

How much does it cost to trim a driver shaft?

For many standard length clubs, you will need to trim somewhere between 1/2″ to 1″. The lengths are longer than needed (for standard clubs) to allow for longer than standard clubs for taller players. If you need your clubs to be 1″ over standard, then you may won’t need to trim at all!

What is tip trimming a golf shaft?

“Tipping” or “tip trimming,” as it’s sometimes called, means trimming a club shaft from the clubhead end, not from the grip end where it’s most often cut.

Where are Aldila shafts made?

Production of shafts takes place outside of the United States, Vietnam, and China, while prepreg production occurs in Poway.

Will shortening my driver shaft make it stiffer?

Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.

Does shortening a golf shaft make it stiffer?

“Cutting more of the tip will have the effect of getting rid of some of the weaker end of the shaft which, in turn, makes the shaft play and feel more stiff.

Can you trim golf shafts?

Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.

Who uses Aldila shafts on tour?

Jon Rahm
Jon Rahm uses an Aldila Tour Green shaft, and Justin Thomas opts for a Mitsubishi Diamana ZF shaft in his driver. Off the tee, all three are sensational, and this perfectly illustrates how one product will never be perfect for everyone when it comes to shafts.

Is Aldila owned by Mitsubishi?

Now part of the MCA family, the Aldila range of shafts benefits from access to the premium research, materials and expertise of the Mitsubishi team. Ready to get started?

Are Aldila shafts graphite?

Aldila NV Iron Shafts – Graphite – . Featuring high modulus carbon fibers and a toughed resin…

Is it OK to shorten a driver shaft?

How long should your driver be based on height?

Tony Finau is one of the tallest golfers on the PGA Tour at 6’4″, and his driver’s length is usually around 45 inches. Both Finau and Fowler are two of the longest drivers on the PGA Tour….Driver Shaft Length Based Solely on Height.

Height (feet/inches)	Driver Shaft Length
5’0″-5’2″	44.5″
4’10”-5’0″	44″
< 4’10”	43″

Can I shorten my driver shaft?

What is the most common driver shaft on tour?

Fujikura driver shafts are the most used by the top 100 PGA Tour players with 28 players using them including Justin Thomas, Jordan Speith, Dustin Johnson, Rory McIlroy, Scottie Scheffler and Louis Oosthuizen. The Ventus Blue 6X and Ventus Black 6X shafts are the most popular individual driver shafts.

How far should a 60 year old hit a 7 iron?

Average 7 Iron Distance By Age

Age Range	Average 7 Iron Distance
40-50	146 yards
50-60	139 yards
60+	128 yards
All Golfers	145 yards

What is the Aldila® tour Green shaft?

The ALDILA ® TOUR Green utilizes the latest materials and manufacturing technology to create a golf shaft designed to maximize the power of your individual golf swing. The constant taper shaft profile provides exceptional feel and a smooth, controlled release.

Can a shaft have more than one option on tip trimming?

Occasionally you will see where a shaft may have more than one option on tip trimming a shaft. These “combination flex” shafts are designed to reduce inventory by being able to create multiple flexes from a single shaft rather than produce two different shafts.

Why are golf shafts so long?

When the manufacturers make a shaft, they do so in mind that is could be used for a wide number of golfers and applications, so the manufacturer makes the shaft longer than it will most likely be used in the final golf club.