How do you winterize a Sea-Doo Sportster?
How do you winterize a Sea-Doo Sportster?
flush motor with fresh water add fuel stabilizer to tank and run a little so the fuel makes it threw the injection unit. then take off fuel filter add a 1/2 cup of oil and gas mix run until it smokes shut down pull plugs spray some defoger into the plug area crank engine but don’t start. all done.
How do you winterize a Sea-Doo 4 TEC?
How to Winterize a Seadoo GTX 4-TEC
- Drain the water from your engine as soon as it is done for the season.
- Clean and thoroughly dry the exterior as well as interior of the craft.
- Add in a fresh tank of gas.
- Raise the GTX 4-TEC’s seat to access its engine.
What happens if you don’t winterize a jet ski?
You’ll want to learn from these mistakes. If You Don’t Winterize Your Boat, Here’s What Happens: Water freezes and expands and can damage anything it’s trapped inside. Water may seep into unprotected spaces to do this. Acidic and corrosive wastes, salt and corrosion buildup can damage delicate parts in engines.
How much does it cost to winterize a jet boat?
The cost of having a professional winterize your boat varies based on its size but seems to average around $300, though it can cost a lot more. This is before any storage costs are figured in. Doing it yourself requires buying the flushing system, stabilizer, fogging oil, and antifreeze.
Do you have to winterize a 4 stroke jet ski?
Yes, every jet ski needs to be winterized to keep it in good condition for the next season and to avoid damage. Moreover, even if you live in a warm climate, you still have to prepare your jet ski for long-term storage!
How do you winterize a Sea-Doo PWC?
Winterizing your Sea‑Doo Watercraft
- Clean jet pump. A quick visual inspection of the jet pump intake and outlet is all that’s needed here.
- Inspect jet pump.
- Stabilize the fuel system.
- Replace engine oil and filter.
- Flush and drain exhaust system.
- Internal Engine Lubrication (Fogging)
- Battery Care.
- Hull and Body Cleaning.
How do you winterize a Sea-Doo jet ski?
Flush and drain exhaust system Run the engine for 90 seconds at idle and ensure water flows out of the pump while flushing. Next, shut the water off and continue to run the engine at 5000 RPM for 5 seconds, then shut the engine down. Drying out the exhaust system is especially critical in cold weather areas.
