What RAM does Dell R710 use?

PowerEdge R710 RAM Upgrade Designed with thermal management capabilities in mind, the PowerEdge R710 Server can be upgraded up to a maximum of 384 GB. Dell’s spec sheet will say 288GB is the max. However, we have tested and found you can utilize 12 x 32GB DDR3 ECC Registered Memory to max out at 384GB.

What can I do with a Dell R710?

The PowerEdge R710 provides an interactive LCD for system health monitoring, alerting, and control of basic management as well as checking the AC power meter and ambient temperature thermometer included with each server.

What generation is Dell R710?

11th generation
So, for example, the R710 model is a Rack 2 CPU system from the 11th generation of servers with Intel Processors.

How do I add a disk to my Dell server?

Steps:

1. Enter the System Setup by pressing F2 during system start.
2. Click on Device Settings.
3. Click on the desired RAID controller device.
4. Click on Main Menu.
5. Click on Configuration Management.
6. Click on Create Virtual Disk.
7. The following list of options are now displayed to define the Virtual Disk parameters:

How do I add a disk to raid?

Expanding a Storage Pool by Adding Disks to a RAID Group

1. Go to Main Menu > Storage & Snapshots > Disks/VJBOD.
2. Verify that the NAS contains one or more free disks.
3. Go to Main Menu > Storage & Snapshots > Storage/Snapshot.
4. Verify the following:
5. Select the storage pool that you want to expand.
6. Click Manage.

How old is a Dell PowerEdge R710?

Description. Dell’s PowerEdge R710 server was released in 2009 and offers reduced power consumption plus Dell’s integrated systems management tools, including iDRAC6 with Lifecycle Controller.

How many cores does a Dell PowerEdge R710 have?

Dell PowerEdge R710 6B Server. 2x E5540 2.53GHz 8-Cores Total.

How do I add more hard drives to my server?

First, turn off your server and make sure it’s unplugged.

1. Next, remove whatever panel you need to get access to the storage compartment where the hard disks are located.
2. Insert the drive into the tray.
3. Insert the tray with drive back into the server.

When did PowerEdge R710 come out?

2009
Description. Dell’s PowerEdge R710 server was released in 2009 and offers reduced power consumption plus Dell’s integrated systems management tools, including iDRAC6 with Lifecycle Controller.

How deep is an R710?

The Dell R710 chassis is 2 rack units in height, has a depth of 28 inches and will fit in standard EIA 19 inch racks.

How much power does a Dell R710 use?

The R710 can be equipped with one 250W power supply. In a configuration with Dual 5540’s, 6 2GB DDR3 UDIMMs, 4 HDD and dual redundant power supplies. You can expect idle power consumption to be roughly 122.3 watts.

What year is Dell PowerEdge R710?

Dell’s PowerEdge R710 server was released in 2009 and offers reduced power consumption plus Dell’s integrated systems management tools, including iDRAC6 with Lifecycle Controller.

How do I know my server generation?

The first number after the letter indicates the class of the system. With 1-3 being 1 CPU systems, 4 – 7 are 2 CPU systems, 8 can be 2 or 4 CPU’s and 9 is 4 CPU’s. The second number indicates the generation, with 0 for 10th generation, 1 for 11th generation and so on.

How do I find my server Storage capacity?

Perform the following steps on Windows:

1. Log in to the Windows operating system as the Administrator user.
2. In the Computer Management window, choose Storage > Disk Management and check the server disk space.

How do I add a disk to my Storage pool?

To add new drives to a pool in Storage Spaces, use these steps:

1. Open Settings on Windows 10.
2. Click on System.
3. Click on Storage.
4. Under the “More storage settings” section, click the Manage Storage Spaces option.
5. Under the “Physical disks” section, click the Add disks to storage pool option.