How do I know what wheel bearings I need?

Remove the hub and look for the reference numbers stamped into the metal of both inner and outer bearings. Once you have the numbers, it will be easy to work out the correct replacements. If you can’t read the numbers stamped on the metal, take measurements of both bearings and the spindle.

What are the 2 most popular wheel bearing types?

In modern passenger cars, two types of wheel bearing are used in accordance with requirements: taper roller bearings and ball bearings. The versions of these bearings that are used vary according to application and load.

How big is a wheel bearing?

Most bearings have an outer diameter of 22 mm and an axle diameter of 8 mm = type 608. 12 STD bearings have an outer diameter of 28 mm and an axle diameter of 12 mm = type 6001.

Are all wheel bearings the same?

There are two types of bearings: hub and wheel. Both employ the same physical characteristics of a bearing in that they house bearing spheres that are lubricated for spinning to allow the wheel to rotate. A major difference between the two is how they are assembled.

Can you replace a wheel bearing without replacing the hub?

Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.

What size bearing is L44649?

Product Description. This L44649/L44610 taper roller bearing is made of chrome steel, is unsealed, and has a steel cage. It has a 1.0625″ inside diameter, a 1.98″ outside diameter, and a 0.56″ depth.

What are the three 3 commonly types of wheel bearings?

Different types of bearings The most popular types of bearings are ball bearings, Tapered Roller Bearings, Ball Thrust Bearings, and Roller Thrust Bearings etc.

Is it OK to change just one wheel bearing?

If bearings go bad at one wheel, it is unnecessary to replace the bearings at the other wheel on the same axle. Don’t let someone talk you into work that is not needed. Get the price estimate for wheel bearing replacement for your make and model of car.

Do you need alignment after replacing wheel bearing?

Yes, you will need alignment if you unbolt the knuckle. If you separate the ball joint, remove the axle from the knuckle, you can press the bearing in/out with the right tool. I’ve done it a couple times borrowing a tool in order to keep my alignment.

Can you replace just 1 wheel bearing?

If bearings go bad at one wheel, it is unnecessary to replace the bearings at the other wheel on the same axle.

Can I change my wheel bearing myself?

Changing your own wheel bearings is considered an intermediate job that can be done at home, but will need some speciality mechanic tools.

What size bearing is L68149?

The inner diameter of bearing # L68149 is 1.378 inches. Both fit on a #84 spindle.

What seal goes with bearing L68149?

Expert Reply: When the L68149 bearing is paired with the L68111 race, the 10-19 grease seal is used. However when the same bearing is used with the L68110 race on a boat trailer, the # 168233 seal is usually used.

How do you determine bearing size?

Some people choose bearings based on the outside diameter of the bearing that matches the dimensions of the housing. 4) Select the bearing of diameter series 0, 2, or 3 from the example of Table 3. If the bearing installation space is limited due to the down-sizing of the machine, select a bearing of diameter series 9.

How do you identify different types of bearings?

Grooves or raceways are cut into the inner and outer rings to guide the rolling element. These are the most common, yet diverse, bearing family. Therefore, there are five primary categories to know when you identify bearings: radial ball, cylindrical roller, spherical roller, tapered roller and needle bearings.

Is changing wheel bearings hard?

Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.

How much should a wheel bearing cost to replace?

The national average is about $350 to fix the wheel bearings at one wheel. As you might imagine, however, luxury brands cost more. Please note: If the wheel bearings need replacing at one wheel, you don’t necessary need to replace the bearings at the other wheel on the same axle. It’s not like matching a pair of tires.

Can I just replace the wheel bearing and not the Hub?

How long does it take a mechanic to change a wheel bearing?

A front wheel bearing replacement on average takes around 90 minutes, whereas a rear wheel bearing replacement takes on average just under 1 hour.