How do I get rid of E48 32 error on DStv?
How do I get rid of E48 32 error on DStv?
DStv No Signal Problem (E48-32 Error) – How to fix step by step
- Why your DStv says no signal?
- Step 1: Check your DStv connection cables.
- Step 2: Reboot your decoder.
- Step 3: Inspect your DStv satellite dish.
- Step 4: Check your LNB.
- Step 5: Call the approved DStv installer.
How do I fix my DStv error code?
If the Error code you see on your T.V set is any of these, just relax and follow this step to get it cleared.
- Go to www.DSTV.com.
- Select the type of Error code that you see on your T.V set, enter your smart card / Serial No, and solve the Captcha.
- Click “Reset Device”
How do I clear DStv smart card error?
To clear this error: * Turn off your decoder and remove the Smartcard. * Clean the chip with a dry soft cloth to ensure that it is free of dust. * Re-insert the Smartcard with the chip facing downwards and the arrows facing the decoder.
How do I fix E48-32 searching signal?
There is not much you can do to solve a no signal or searching for signal error (E48-32) when it is caused by rain. The best resolve is to have your dish aligned to optimize the DStv reception. Furthermore you could upgrade your DStv installation by installing a bigger dish.
What causes E48-32?
Probably the most common DStv error code people experience is E48-32 together with the message “There is no signal. This may be due to bad weather or a faulty connection in the installation”. This message is from DStv decoder models 4U, 4S, 5U, 5S and Explora 1, 2 and 3.
How do I fix E37 32 on DStv?
E37-32 (Service does not exist.) Please re-boot and re-scan your decoder to get an updated service list. Switch the decoder off at the plug. Wait 30 seconds and then switch it back on.
What is E37 error?
E37 is a temperature sensor error. When the unit cannot properly detect the internal drum temperature it will not be able to proceed with its drying cycle and will display the E37 error code.
How do I reset my DStv?
So, what is the code to reset DStv? All you need to do is type ‘RESET smartcard number’ and send the SMS to 30333 (for Nigerians). For example, if your smartcard number is 98674523, you will send an SMS with RESET 98674523 to 30333.
How do I fix E50 32 on DStv?
Are you experiencing a DSTV E50-32 on screen error, “The channel number you selected is not in this viewing environment”? You can easily resolve it by resetting/rebooting your decoder. To easily reset your decoder, you can unplug the power supply from the wall while decoder is on. Wait 3 minutes and plug it back.
What causes a Smartcard error?
The smart card is open to damage from misuse and improper handling like constant removal. A Smartcard is faulty when the decoder to which it has been paired with does not recognize the Smartcard any longer. These would be identified when your decoder starts displaying error codes on your tv screen.
What is error E48 32 on DStv?
A loss of signal will give you a “E48-32 There is no signal. This may be due to bad weather or a faulty connection in the installation” error on your DStv decoder.
What is error code E32 on DStv?
DStv E32 Error Code The e32 error code is similar to the e30, and it appears on the screen, usually, after you have powered on your decoder. You will see that when your subscription is taking a much longer time to be confirmed by the system.
How do I clear error E17 on DStv?
How do I clear e17 error on DStv? Both errors E17 and E18 arise when there is an issue with your smartcard. For E17, smartcard marriage conflict can be resolved by making sure that the card is properly inserted and that it is the proper card.
What does e48-32 mean on DStv?
DStv E48-32 Error Code The e48-32 error code is one of the error code that almost every customer has come across. It happens as a result of your decoder not being able to detect a signal from your dish. Why Do I get E48-32 On My TV?
What is error code E04 on DStv?
1. E04 Error code Error cause: Your DSTV smart card is not correctly inserted, or the smart card is damaged. Solution: Switch OFF your DSTV decoder, eject the smartcard, and observe the terminals if it has rusted. Of yes clean the smartcard terminals with methylated spirit or fuel and it back.
