How do I fix error code 5011?

If your Canon Printer is showing 5011 error it is mostly because the cartridge of the printer is stuck….1. Perform a Power Cycle

1. Power off the printer again.
2. Open the printer’s lid for the scanner. Turn on the printer again keeping the lid open.
3. Close the lid after the printer restarts. Check for any improvements.

How do I reset my Canon printer?

1 Factory Reset

1. Press Setup.
2. Press the arrow buttons until you navigate to Device settings and then press OK.
3. Press the arrow buttons until you navigate to Reset setting and then press OK.
4. Press the arrow buttons until you navigate to Reset all and then press OK.
5. Select Yes.
6. Press OK. Your device is now reset.

Where is the reset button on a Canon printer?

You can perform a factory reset on a Canon Pixma printer by following these simple steps:

1. Start your printer.
2. Go to the menu, scroll with the arrows, and find and select ‘Device Settings.
3. Press ‘OK.
4. Select the ‘Resetting’ option.
5. Press ‘OK’ to begin the device resetting process.
6. Turn off your Pixma printer.

What does 02p mean on Canon printer?

This error typically indicates one of the inks is not inserted properly.

What does E59 mean on a Canon printer?

Understand and resolve Support and / or Error Codes

Error Code	Support Code	Cause
E59	2114	Paper settings for printing do not match paper information set on printer.
E61	3412	Scanning original has failed.
E62	–	Unexpected error occurred while scanning is in progress.
E63	–	Reached the upper limit of pages which can be saved.

Can you hard reset a Canon printer?

A persistent Canon printer error calls for a hard reset. The process is easy, and it returns the printer to the factory default settings. Locate the “Stop” button and hold it down until the printer alarm sequence begins. Release the button after the alarm flashes 19 times to restore the factory default settings.

How do I reset my Canon ink cartridge without chip resetter?

Open the Canon IJ Printer Assistant Tool. Make sure that the printer is on, and click Remaining Ink Notification Settings. Select the ink color and click Reset to reset the remaining ink level counter. When you reset the remaining ink level count, you must refill the ink tank to the upper limit line.

How do I force restart my Canon printer?

How do you clean encoder film strips?

Clean the encoder film

1. Moisten a cotton swab with the isopropyl alcohol or window cleaner. Don’t use any other detergents.
2. Gently move the cotton swab over the surface of the film, until the entire film is transparent and clear.
3. Close the paper output cover, plug in the power cord, and turn the machine back ON.

How do I factory reset my Canon printer?

Can I use alcohol to clean encoder strip?

You’ll need a lint free cloth and some Isopropyl alcohol – DO NOT USE THE CLEANING FLUID USED FOR REGULAR MAINTENANCE – You can use alcohol wipes from the medicine cabinet in a pinch. You want the cloth to be damp, not dripping. Gently wipe the encoder strip with the moistened cloth moving in one direction only.

Where is the encoder strip?

The best way to locate the encoder strip is to look on the left side of your machine in the opening between the platen and the support arm. There you will see two plastic strips running the width of the machine. One gray and the other clear. The gray strip is the encoder strip.

How do I reset my Canon ink cartridges after refilling?

What does error code 5100 mean on a Canon printer?

Canon Support Code 5100 is an annoying error that significations that there is a problem in the ink carriage. Usually, something recently is hampered the ink cartridge carriage. While trying to print any important documents, you may receive the Canon error 5100 on the screen.

How to solve Canon printer error code 5100?

Significant Issues Behind the Canon Printer Error: Some of the common issues become the critical factors that create the Canon Printer error very often.

Resolve Canon Printer Error Code 5100 With Easy Technical Troubleshooting Steps.

The Bottom Line.

How to fix canon ip2770 5100 error?

Press the Power button to turn off the Canon Printer

Then check the paper jam in the input paper tray.

After that,open the Canon printer Output Cover and make sure there is no paper inside.

Open the Canon printer Back Panel and check if any paper is there or not.

How to fix support code 5100 in a Canon printer?

At first,switch off the Canon printer by pressing the Power button.

After switching off the printer,open the Front Panel of the Canon printer

Now,remove the cartridge from the printer and then reinsert it at its place.

After doing this,close the Front Cover.

Switch on the printer and then check if the printer works correctly or not.