Does Tacx Flow work with Zwift?

All Tacx smart trainers are compatible with Zwift and can be connected using Bluetooth Low Energy (BLE) or an ANT+ antenna (see Zwift Support – Pairing Your Devices for more details).

Does Tacx Flow have Bluetooth?

The Tacx Flow transmits data on both ANT+ & Bluetooth Smart, as well as allowing interactive resistance control across both ANT+ & Bluetooth Smart.

Is Tacx Flow Interactive?

The Tacx Flow Smart Trainer is an interactive smart trainer that provides accurate and consistent speed, power and cadence measurements. And, its virtually silent flywheel ensures an immersive and realistic indoor riding experience.

How do you calibrate tacx flow?

Calibration Process

1. Download and install the Tacx Training app.
2. Open the app and select the Settings icon.
3. Select Device Manager.
4. Select the Tacx Flow from the list of trainers – when all icons turn green it has been connected successfully.
5. Select Set Up Tacx Flow.
6. Select Calibrate.
7. Select Calibrate Now.

Can I use Zwift without ANT+?

Do you need ANT+ to run Zwift? You don’t need to use an ANT+ connection to run Zwift. You can also pair your devices via Bluetooth Low Energy (BLE).

How do I pair my tacx flow smart?

Connecting Your Tacx Smart Trainer to the Tacx Training App

1. Open the Tacx Training app.
2. Select Connect Trainer.
3. Select your trainer from the list when it is found.
4. Confirm the icons are green.

How do I connect my tacx to my laptop?

Connect Your Trainer via Bluetooth

1. Open the Tacx Desktop app.
2. Select Device Manager from the side panel.
3. If Bluetooth is enabled on your computer, the BT icon in the top right corner will turn green.
4. Click on your Tacx Smart trainer when it appears.

Does tacx have ANT+?

All Tacx Smart trainers are equipped with two wireless communication technologies: Bluetooth. ANT+ (FE-C)

How do I calibrate Zwift with tacx?

Calibrating your Trainer in Zwift

1. Log-in to Zwift.
2. On the paired devices page, click “Search” under the Controllable Trainers icon.
3. Find your trainer and click “Okay.”
4. Click the wrench under Power Source.
5. Follow the on-screen instructions.
6. Ride On!

How do I make Zwift easier?

Adjust Trainer Difficulty

1. Launch Zwift and go to the menu on the pairing screen.
2. Click on “Settings” and find the Trainer Difficulty slider.
3. The default position is midway between “Off” and “Max,” or.
4. Move the slider right to make climbs more difficult.
5. Move the slider left, and climbs are easier.

How accurate is tacx flow power?

Tacx claims the Flow Smart is accurate to within +/- 5 per cent and I generally found power accuracy to be good once warmed up, with a few caveats. When riding along at steady power outputs, the Flow Smart does an impressive job of consistently tracking on-bike power meters closely.

Is Zwift better with Bluetooth or ANT+?

Although they both work in a similar manner, BLE tends to give you a stronger signal. With more modern ANT+ and BLE protocols (typically found in newer hardware), you tend to get a more accurate Zwift experience.

Should I use Bluetooth or ANT+?

Bluetooth Smart Communication Because of Bluetooths communication protocol it can transmit data faster than ANT+, roughly 64x per second, 16x faster than ANT+. When using Bluetooth, once a connection between two devices has been made, no other bluetooth accessories can connect to the same device.

Can you use mountain bike on tacx flow?

Tacx Flow Smart setup If you’re using a road bike with standard 700c wheels, as I am (or a mountain bike with 29in wheels), then you’ll attach the resistance unit to the upper set of holes. It’s worth noting the Flow Smart doesn’t ship with thru-axle adaptors, only a 130mm quick-release skewer.

Why wont my tacx connect?

The most common reason why a Tacx Smart Trainer will not pair with a training application using Bluetooth is that the trainer is already paired with another device or training application. Tacx FLUX Smart, NEO Smart, and NEO Bike Smart Trainers will indicate whether or not they are currently connected via Bluetooth.

How do I connect my tacx to my phone?

Note: The Tacx Training app can only pair with Tacx Trainers and not trainers from other companies….Connecting Your Tacx Smart Trainer to the Tacx Training App

1. Open the Tacx Training app.
2. Select Connect Trainer.
3. Select your trainer from the list when it is found.
4. Confirm the icons are green.

Is ANT+ better than Bluetooth?

How do I connect tacx to ANT+?

To use ANT+ with a desktop you will require an ANT+ USB dongle, such as the T2028 Tacx USB ANT+ Antenna. It is recommended to install the ANT+ USB dongle as close as possible to the trainer. A USB extension cord may be used.