How do you convert SAE to metric?
How do you convert SAE to metric?
How to Convert SAE to Metric
- Step One: Convert the Fraction to Decimal. The first step is to convert the inch fraction to a decimal.
- Step Two: Convert to Millimeters. The next step is to multiply the inch decimal by 25.4 to convert it to millimeters.
What is the SAE equivalent?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 3/16″ | 0.188 | |
| 5mm | 0.197 | |
| 5.5mm | 0.216 | |
| 7/32″ | 0.219 |
What is the SAE equivalent to 32 mm?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/4″ | 29mm | 1-1/8″ |
| 32mm | 1-1/4″ | |
| 7/8″ | 34mm | 1-5/16″ |
| 35mm | 1-3/8″ |
What is the difference between US customary and metric system?
The metric system uses units such as meter, liter, and gram to measure length, liquid volume, and mass, just as the U.S. customary system uses feet, quarts, and ounces to measure these.
How do you find metric equivalents?
To convert from one unit to another within the metric system usually means moving a decimal point. If you can remember what the prefixes mean, you can convert within the metric system relatively easily by simply multiplying or dividing the number by the value of the prefix.
What metric and SAE sizes are the same?
Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.
What SAE and metric sizes are the same?
Is a 3/8 socket the same as a 10mm?
8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch.
Is 7mm and 9/32 the same?
7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch.
Which metric and SAE sockets are interchangeable?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
Why is there no 10mm socket?
It seems like the 10mm bolt size is the most common bolt size across most cars so, naturally, you’re going to use the 10mm socket the most. But, since the 10mm socket is so small, if you don’t remember where you place it, this is the socket you’ll most likely lose, hence all the memes.
Is 3/8 and 10mm the same?
9mm = almost 3/8 inch. 10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch)
Should I buy metric or SAE sockets?
Typically, SAE sockets and wrenches are used on American-made cars, as mentioned previously, however, when it comes to working on imported cars (assuming you’re in the USA) you’ll most likely be looking for metric units of measurement.
What is the difference between customary and metric units of measure?
What is Metric? The metric system uses units such as meter, liter, and gram to measure length, liquid volume, and mass, just as the U.S. customary system uses feet, quarts, and ounces to measure these.
