Why is my CenturyLink internet not working?

Reboot your modem manually or using the My CenturyLink app. Make sure your modem is updated with the latest firmware version. As a last resort, try resetting your modem to factory defaults. If you have custom settings that you want to keep, you can backup and restore your modem settings before doing the reset.

What is the IP address for CenturyLink?

Type 192.168. 2.1 (the most common IP for CenturyLink routers) in the address bar of your web browser to access the router’s web-based user interface.

How do I reset my CenturyLink modem?

How to reboot manually

1. Unplug the power cord from the back of the modem.
2. Wait for 1 minute.
3. Plug the power cord back in and wait for the power light and internet light to turn green (or the single LED if you have a C4000 model).
4. You should now be able to get online.

How do I fix my CenturyLink DSL connection?

Troubleshooting the DSL light Make sure your equipment is set up correctly and that your modem is not filtered. Try rebooting your modem. If you have another phone jack in the house connected to your internet line, try connecting the modem to the other phone jack, in case the jack is faulty.

How do I fix my internet connection?

Restart your device. Open your Settings app and tap Network & internet or Connections. Depending on your device, these options may be different. Turn Wi-Fi off and mobile data on, and check if there’s a difference. If not, turn mobile data off and Wi-Fi on and check again.

What can I do if my internet is not working?

Complete list of fixes if your internet is not working

1. Restart your equipment.
2. Connect with an Ethernet cable.
3. Check for an internet outage.
4. Try using a different device.
5. Check your wires and cables.
6. Run your computer’s internet troubleshooter.
7. Reposition your router/gateway.
8. Update everything.

How do I access CenturyLink admin?

Open a web browser and type http://192.168.0.1 into the web address field. 3. Log in to the modem’s settings interface (Modem GUI) using your Admin Username and Admin Password. Note that these are different from your wireless network name (SSID) and WiFi password (security key).

What is CenturyLink default gateway?

Log into the router by navigating to the Default Gateway IP address, typically 192.168. 0.1. Enter the default login credentials provided by your ISP. The credentials are usually located on a sticker on the router.

What happens if I reset my modem?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

Why do modems need to be reset?

Rebooting your modem can fix Internet connection problems, improve slow moving connections and resolve wireless issues, which also affect your Digital TV service that is being transmitted over an internet connection.

What causes the DSL not to work?

If the DSL LED flashes continuously or doesn’t light, you might have a faulty DSL connection caused by Internet service provider (ISP) problems or home wiring issues.

What to do if DSL is not working?

Power-cycle the DSL modem Turning the modem off and back on causes it to re-synchronize the DSL signal and the network connection to your computer. Often, this by itself is enough to fix a DSL connection problem. To do this, unplug the power cord from the DSL modem, wait about 30 seconds, then plug it back in.

Why is my WiFi connected but no internet?

WiFi connected but no Internet: Start with the router If the Internet works fine on other devices, the problem lies with your device and its WiFi adapter. On the other hand, if the Internet doesn’t work on other devices too, then the problem is most likely with the router or the Internet connection itself.

Why did my internet suddenly stop working?

Reboot your modem and router. The way to fix this is to unplug both your modem and your router (you may have one piece of equipment that acts as both) and wait a full 60 seconds. Then plug them both in again and wait for all the lights to stop flashing. At that point, try to reconnect to the Internet again.

Why is my router connected but no internet?

Outdated network driver Sometimes, an old, outdated, or corrupted network driver can be the cause of WiFi connected but no Internet error. Many times, a small yellow mark in your network device name or in your network adapter could indicate a problem.

Why do I have WiFi but no internet?

When there is no internet connection, yet your internet service or router isn’t the problem, then there may be a problem with your network permissions. Every home WiFi network has “Media Access Control” (MAC) identifiers that allow certain machines access to your network.

What is admin password in WiFi?

Router password / Admin password The router or admin password is used to access the web-based setup page or the user interface (UI) of your router for configuration and settings update or verification.

How do I log into my router as an administrator?

Step 1: Open your web browser and type in the IP address of the router (192.168. 0.1 by default). Step 2: Enter the username (admin) and password (blank by default), and then click OK or Log In.

How do I access My CenturyLink router settings?

What is CenturyLink default password?

3. Log in to the modem’s settings interface (Modem GUI) using your Admin Username and Admin Password. Note that these are different from your wireless network name (SSID) and WiFi password (security key).

https://www.youtube.com/watch?v=-0xyNCH7YuU