How fast does the axial SCX10 go?

Ultimately, the Axial SCX10 II was never meant to go fast because crawlers are built for, well, crawling—as I found out when I checked its baseline speed with my GPS Speed Tracker: 7mph….RC In Action.

Brand	Links	Views
Losi	BUILD IT – THE 22S DRAG PLATFORM IS NOW A ROLLER – …	4
Exocaged RC	SBR 2.0 Awesome run	4

Are axial SCX10 waterproof?

Axial SCX10 II Deadbolt 4WD RC Rock Crawler Off-Road 4×4 Electric RTR with 2.4GHz Radio, Waterproof ESC, 1/10 Scale (Olive Drab)

What scale is the axial SCX10?

1/10 scale
Axial Racing – SCX10. The 1/10 scale Axial® SCX10™ has long been the RC vehicle platform of choice for scale trail enthusiasts.

Is the axial SCX10 3 waterproof?

The SCX10 III RTR uses a Spektrum FIRMA SMART 40A BRUSHED 4-CHANNEL ESC/RECEIVER with Integrated SMART Technology, Dedicated LED power connectors, Built-in 4-Channel DSMR® Receiver, with a Waterproof design.

How can I make my axial SCX10 faster?

The quickest way to adjust the gearing on your Axial Racing vehicle and achieve readily noticeable results, is to change the pinion gear. If you were to change the stock 20-tooth pinion on your Honcho SCX10 RTR to a 25-tooth pinion, you would immediately notice the truck is faster.

What battery does a SCX10 II take?

The radio is powered by four AA batteries (included) and also features SLT (Secure Link Technology), which creates an unbreakable link between the receiver and your transmitter featuring an auto-bind design.

Can you submerge a brushless motor?

The truth is brushless motors are water resistant however they are not really waterproof. Water is never pure in a lake or puddle or even rain. Small particles will find there way in to the bearings on a brushless motor delivered right from the water itself. Over time this is what can destroy the bearings.

Can you run brushed motors underwater?

Brushed motors are well known for being able to survive wet conditions. They can even run under water—completely submerged. Brushed motors are frequently said to be waterproof and are actually a great example of the difference between being able to do something and being able to do something without long-term damage.

Who owns axial RC?

Horizon Hobby, LLC
Founded in 2005, Axial R/C, Inc. quickly became a global brand leader of hobby grade radio controlled products and was later acquired by Horizon Hobby, LLC in 2018.

When did the axial SCX10 II come out?

2005 marked the birth of the Axial brand, and shortly after, thoughts about the first SCX10™ began, with development wrapping up in 2008. The SCX10™ was introduced to the world as a builders kit, paving the way, or better yet, raising the bar for a new generation of scale trail enthusiasts.

Does SCX10 3 come with lights?

LED headlights and tail lights are included. The SCX10™ III Jeep® JLU Wrangler body’s fender liners and floor sides hide internal components that would usually be visible from the side of the chassis.

What battery does the SCX10 III take?

4 AA batteries
This transmitter requires 4 AA batteries. 1. Remove the battery cover from the transmitter.

What battery connector does axial use?

You will also need a battery with a Tamiya connector. If your vehicle has an Axial AE-3 ESC, you can run an 8-cell NiMH or 3S LiPo battery, and the battery will need to have a Deans Ultra Plug. AA Batteries. Axial Racing’s 2.4GHz radio systems are highly efficient and only require four AA batteries for use.

What battery does the Axial Wraith use?

Axial Wraith Battery: Most of Gens ace RC car lipo batteries are suitable for Axial Wraith, such as 5000mAh 2S to 7200mAh 2S, perfectly size for car battery tray.

Are axial RC cars waterproof?

Axial bearings are sealed and made out of high-quality stainless steel, but RC bearings are not watertight. The seals keep dirt out and grease in, but prolonged submersion in water will contaminate the bearings, as dirty water will eventually seep in.

Do brushed motors need to be broken in?

Water is abrasive and accelerates the wear of the brushes and the comm surface, essentially taking life away from your new motor very quickly. Our motors don’t really require a break-in before use, but you can run them on low voltage (4-6V) for a minute or two both directions to seat the brushes.

Does Horizon Hobby own Redcat Racing?

We are excited to announce that Redcat Racing Products are now available from Horizon Hobby!

Does Horizon Hobby own tower hobbies?

Tower Hobbies was started in 1971 by Bruce Holecek, a hobbies enthusiast. Tower Hobbies is now a division of Horizon Hobby, LLC, which is headquartered in Champaign, Illinois, United States.

What is the wheelbase of the Axial SCX10 II?

ADJUSTABLE WHEELBASE This chassis is designed at 12.0” wheelbase length, but is easily adjusted to either a 11.4” or 12.3” wheelbase (optional link kits sold separately). Axial designed the chassis so that all the wheelbase adjustability happens out back without sacrificing front-end suspension geometry.

What is the wheel base on a scx10 3?

Product Specifications

Final Drive Ratio	45.6:1
Speed Control	Sold Separately
Wheelbase	12.3″ (312 mm)
Approximate Assembly Time	7-10 Hours
Body	Clear polycarbonate Jeep Wrangler Unlimited with detailed interior

Is the axial scx10 II the best trail-capable RC vehicle?

This is perfect for the trail, as it provides reliable and simple reception without the possibility of anything breaking.All-in-all, the power and control options offered by the Axial SCX10 II mark this trail-capable RC vehicle as one of the top competitors in the field.

What is the difference between the scx10 and SCX 10 II?

The new design, known as the SCX10 II, retains the trademark SCX10 frame. However, it improves nearly every other part of the original design. The axles, transmission, and suspension have all been redesigned to offer increased trail performance.

Why choose axial scx10 III Jeep Wrangler Rubicon JLU 1/10th kit?

The Axial SCX10 III Jeep Wrangler Rubicon JLU 1/10 th Kit is close to RC crawler perfection. It has high quality construction all around and great upgradability and versatility potential. From the option to paint your own body to driving dynamics every is controlled by you.

What is the new scx10 III chassis?

The new SCX10 III chassis is not just an upgrade over the second generation, it is a new design from the ground up. It’s a new 4-piece chassis with 2 rails interlocking at each side. You can adjust the wheel base, by moving the rear rail in and out instead of moving the axles to different holes on the rails.