What is Fe in LG washing machine?

The LG washing machine shows an LG washer FE error code, indicating that the water level has reached too high. A faulty inlet valve may have caused this, and the machine could fill with water while it is turned off. When this happens, code FE (short for FILL ERROR) can appear on the control panel.

How do I reset the code on my LG washer?

To reset the washer, unplug it and press the Start/Pause button for five seconds before plugging it back in. The LE code can indicate that the washer has been overloaded; large loads and bulky items can strain the motor. Remove a few items from the washer to reduce the load size and restart the cycle.

How do I fix Fe error?

The FE error code indicates that the washer is overfilling….To fix this:

1. Close both water taps.
2. In order to drain out any trapped water, power the washer back on, and press the spin speed button until no spin is selected, and press the START/PAUSE button.
3. Once the washer has drained, restart the washing cycle.

How do I fix Fe error on my LG dishwasher?

FE – Fill Error

1. Press the POWER button to turn the dishwasher off.
2. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
3. Turn the circuit breaker to the dishwasher back ON.
4. Press the POWER button to turn the dishwasher ON, and start a new cycle.

How do I force drain my LG washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

What are the error codes of LG washing machine?

Select LG error code on your display:

• FE – Water Overflow Error.
• OE – Drains Slowly.
• IE – Inlet Water Supply.
• UE or UB – Unbalanced Load.
• CL – Child Safety Lock.
• LE – Locked Drive Motor.
• tCL – Tub Clean Cycle.
• dE – Door is Open.

How do you fix Fe error on LG washer?

FE Error Code This is usually the result of faulty water valve. To fix this: Close both water taps. In order to drain out any trapped water, power the washer back on, and press the spin speed button until no spin is selected, and press the START/PAUSE button.

How do you fix error code FE on LG washer?

You need to check the door of the washing machine carefully. There could be some foreign particles or clothes stuck on to it.

Inspect the elements of the lock. In case you see that the latch is stuck,then the dirt should be released.

Try performing a hardware reboot.

Also,you need to make sure that the lid of the washer is closed properly.

How to clear LG washing machine error code FE?

– We can first try to correctly reset the FE error, suddenly the whole thing is not a malfunction, but a short-term system failure. – If the reset fails, we will need to test all the indicated modules one by one until we find a malfunction. – As soon as the malfunction is detected, we will need to quickly and competently fix it.

How to identify LG washing machine error codes?

Turn off the washing machine and remove the plug from the wall socket.

Remove the top of your LG Washing Machine by removing the screws,holding them down,pulling the top backward,lifting it off,and placing it aside.

Remove the soap drawer entirely by pulling it out and unscrewing the components that hold it in place

What are some common LG washer error codes?

FE – Water Overflow Error

OE – Drains Slowly

IE – Inlet Water Supply

UE or UB – Unbalanced Load

CL – Child Safety Lock

LE – Locked Drive Motor

tCL – Tub Clean Cycle

dE – Door is Open

CE – Over Current in the Electrical Circuit

SUD – Suds Reducing Cycle

https://www.youtube.com/watch?v=tQj00r_rE0M