What is the formula for octene?

C8H161-Octene / Formula
1-Octene is an organic compound with a formula CH2CHC6H13. The alkene is classified as a higher olefin and alpha-olefin, meaning that the double bond is located at the alpha (primary) position, endowing this compound with higher reactivity and thus useful chemical properties.

What does 1-octene look like?

1-octene appears as a colorless liquid. Flash point 70°F. Insoluble in water and less dense (at about 6 lb / gal) than water.

What is octene used for?

Use: 1-Octene (C8) is used in the production of synthetic fatty acids mainly used in synthetic lubricants, plasticizers, surfactants, polyethylene comonomers, elastomers and plastomers, and agrochemicals.

Does octene exist?

The linear 1-octene present in high concentration in the C8 hydrocarbons has the same commercial benefit as 1-hexene as a valuable co-monomer, but it is considerably more difficult to purify. The oxygenates are not only more concentrated, but they also contain some carboxylic acids.

What is the formula for 2 octene?

C8H162-octene / Formula

What does 1-octene smell like?

metallic mushroom-like
Oct-1-en-3-one has a strong metallic mushroom-like odor with an odor detection threshold of 0.03–1.12 µg/m3 and it is the main compound responsible for the “smell of metal”, followed by decanal (smell: orange skin, flowery) and nonanal (smell: tallowy, fruity).

Is 1-octene an alcohol?

(R)-1-Octen-3-ol, also known as 1-vinylhexanol or 3-hydroxy-1-octene, belongs to the class of organic compounds known as fatty alcohols. These are aliphatic alcohols consisting of a chain of a least six carbon atoms.

What is the boiling point of octene?

249.8°F (121°C)1-Octene / Boiling point

What is the name of c5 h10?

Cyclopentane
Cyclopentane | C5H10 – PubChem.

What is the density of a cubic inch of steel?

In Imperial or US customary measurement system, the Steel density is equal to 493.18088874 pound per cubic foot [lb/ft³], or 4.566489709 ounce per cubic inch [oz/inch³] .

What units are used to measure the density of steel?

Density of steel in a few select units of density measurement: Density of steel g cm3 = 7.9 g/cm³. Density of steel g ml = 7.9 g/ml. Density of steel g mm3 = 0.0079 g/mm³. Density of steel kg m3 = 7 900 kg/m³. Density of steel lb in3 = 0.2854056068 lb/in³.

What is the purpose of adding 1 octene to polyethylene?

New York, NY: Van Nostrand Rheinhold Co., 1993, p. 848 As a comonomer in the production of high density polyethylene and linear low density polyethylene. The addition of 1-octene is used to modify the density and other properties of the polymer.

What is the flash point of 1 octene?

1-octene appears as a colorless liquid. Flash point 70°F. Insoluble in water and less dense (at about 6 lb / gal) than water. Hence floats on water. Vapors are heavier than air and may settle in depressions. Reported to biodegrade very slowly.