Why is my Toyota RAV4 check engine light on?

If the check engine light in your Toyota RAV4 starts shining, that means that the problem needs speedy attention and your Toyota should be brought in hastily. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

How do you reset the check engine light on a Toyota Rav4?

Open it and look for a 20 amp fuse labeled “EFI MAIN” and a 10 amp fuse labeled “ETCS”. Pull both these fuses and wait a minute or two and plug them back in. The ECM codes should now be cleared and the lights off. This worked without any issues on a 2016 Rav4 with loose gas cap.

Can I keep driving with check engine light on?

If the check engine light turns on and is steady, not flashing, you can keep driving as long as your vehicle isn’t performing out of the ordinary. A steady light is your car’s way of telling you your car is in need of service.

How to unlock a Toyota RAV4?

jlawr1. If you press Start Engine,you may get an error message — at least I did.

How to fix Toyota RAV4?

Stop your engine and park the car in a safe spot.

What does VSC light mean on Toyota RAV4?

Your VSC light staying on means that the Toyota Rav4’s VSC system has been deactivated. It is not as safe to drive without it on, but it should still drive fine. Good luck determining what is causing the problem. Remember, a good code scanner can save a ton of time.

How to reset maintenance light on your Toyota RAV4?

Put your key in the RAV4’s ignition.