What is a self-latching device?
What is a self-latching device?
Self-Latching means a mechanical device or latch installed at the top and on the inside of the pool gate and which is engaged each time the gate is secured to its closed position, which will not allow the gate to be re-opened by pushing or pulling and which will ensure the pool enclosure gate remains closed until …
Do you have to have a lock on your gate if you have a pool?
The answer to this question is yes. In fact, the Consumer Product Safety Commission recommends for pool owners to install a self-closing, self-latching, key lockable gate in any pool fence system.
Do I need a fence around my pool if my yard is fenced in?
What Counts as a Pool Barrier? According to the safety guidelines from the U.S. Consumer Product Safety Commission, pool barriers and fences should be a minimum of 4 feet tall and should surround all sides of a swimming pool.
How does a Magna Latch work?
D&D Technologies invented magnetic safety gate latches in the early 1990s. Designed specifically for toddler-resistant gates, these Australian-made latches use patented magnetic technology and super-strong “permanent magnets” to eliminate mechanical jamming during closure.
Is it a law to have a fence around your pool?
Fencing – In almost all cases, public-use pools are required to have some kind of fencing around the pool. States, cities, and counties usually specify exactly what is required of these fences in terms of material, spacing, gates, locks, and more.
Do you legally have to have a gate around your pool?
At any residence where one or more children below the age of six reside, a swimming pool must be protected by a wall, fence, or barrier surrounding the pool area. If the enclosure does not include the adjacent residence, it must: Entirely enclose the pool area.
How do self closing hinges work?
Self-closing cabinet hinges contain a small spring that pulls the door back into contact with the cabinet frame after you push the door gently. Self-close means when you close the door and it gets within 2″ of closing, it will pull itself close because of the spring in the hinge itself.
How do you install self closing hinges on a fence gate?
Self Closing Gate Hinge Installation Instructions
- Place horizontal adjustment on gate only.
- Screw hinges onto gate – hinge side with the two nuts (best to pre-drill holes for the screws)
- Screw hinges onto post – spring loaded side of the hinge (best to pre-drill holes for the screws)
What type of hinge do I need for a gate?
With Tee hinges, you’ll want to use a hinge length of at least half the width of the gate you’re hanging. For instance, a 1000mm wide gate will need a 500mm Tee hinge. For any gates above 2100mm, a third hinge should be added to support the additional weight.
Do gate hinges go inside or outside?
Depending on the type of hinge you choose, you can install it on the exterior of the fence or the interior of the gate. Position the bottom hinge against the gate to locate the best location.
A self-latching device including a latch body having a primary bolt, a strike, the primary bolt being mounted for sliding movement in said body between a latching position where, in use, the…
How does a self latching sash latch device work?
A self-latching sash latch device for use with a sliding closure. The latch device has a primary bolt ( 15 ) which in use engages with a strike ( 12 ). The primary bolt ( 15 ) is coupled to an operating element ( 13 ) whereby the primary bolt is moveable from a latching position to a retracted position.
What are the components of latch device?
The latch device further includes a base 14, which in the preferred form is plastic. According to the present invention the latch element comprises a primary bolt 15and a secondary bolt 16. These components can be made from a suitable plastic or metal.
What is a limit release latch device?
The latch device as claimed in claim 11, further including limit release means engageable with the primary bolt when in the latching position operable by the operating element to release the limiting means to free the primary bolt for movement from the latching position to the retracted position. 14.
