How do I increase the volume on my Jabra PRO 9450?

Adjusting the Listening Volume on the Jabra PRO 9450 Wireless…

1. Brushing in a backward motion (towards ear) will increase the listening volume.
2. Brushing forward (towards your mouth/end of microphone) will decrease the listening volume.

How do I increase the volume on my Jabra headset?

To increase the volume in your headset, swipe your finger up the touch-sensitive panel toward the + indicator. Make sure your finger covers the entire touch-sensitive panel. To decrease the volume in your headset, swipe your finger down the touch-sensitive panel toward the – indicator.

Why does my Jabra PRO headset keep beeping?

You may have selected the Tone guidance setting in Jabra Sound+. Tone guidance uses beeps for guidance instead of voice prompts.

How do I reset my Jabra PRO 9450?

Press and hold until the mute button on base starts flashing. While the mute button on the headset base is flashing, simultaneously press and hold the Desk phone button and the Softphone button for 5 seconds to reset the configuration.

Why is my Jabra headset volume so low?

The received/transmitted audio may be low because the headset cable is connected to the wrong port on the phone. Connection to the wrong port may cause low audio or even permanent damage to the headset. Make sure the Jabra flat cord with modular connector is inserted into the headset port on the desk phone.

How do I change my Jabra settings?

To adjust the wireless range settings, follow these steps.

1. Make sure the Jabra Link Bluetooth adapter and the Jabra device are turned on and paired.
2. In Jabra Direct, select the Jabra Link Bluetooth adapter.
3. Click Device.
4. In Device settings > Headset > Wireless range, select the appropriate setting.
5. Click Apply.

What does the middle button on Jabra headset do?

The busylight indicator on the headset and the controller indicates to others when you are busy. MANUALLY TURN BUSYLIGHT ON/OFF To manually activate the busylight on/off, tap the Busylight button on the controller. The busylight can be activated even when you are not on a call.

How do I mute my Jabra PRO headset?

Press the “Volume Up” and “Volume Down” buttons simultaneously and you will hear a low beep alert. This signals that the unit is muted. Press either volume button to disable mute.

Why do I hear a beeping noise in my headphones?

Your Bluetooth headset may start beeping due to interference by nearby devices. Electronic devices such as cordless telephones, cellular devices, etc., are the possible causes. Check if you have a cell phone lying next to your PC and try to move it further to check for possible interference.