How do you reset the drum image on OKI printer for free?

ANSWER

1. Start the Status Monitor for the printer.
2. Click on Printer Setup tab – Printer Menu button – Maintenance 1 tab.
3. Click the [Reset] button next to Drum Counter, then click on the [OK] button to reset the drum counter.

How do you change the drum image on Oki printer?

How to Replace the Image Drum Cartridge

1. Open the cover and remove the used image drum cartridge.
2. Unwrap the new Image drum cartridge and remove the protective sheet.
3. Insert the new image drum cartridge and press it down.
4. Remove the toner well cover and discard.
5. Install a new toner cartridge.

What is image drum unit?

The imaging drum is the heart of the laser printer or the copier. It transfers the print image, consisting of toner, onto the paper. An imaging drum is also called OPC, imaging unit or just drum by some manufacturers. A dirty or worn out drum reduces extremely the printing quality of a laser printer.

How do I check drum life on Oki printer?

When the “Image Drum Near Life” message appears on the display screen, prepare a replacement image drum. If you continue printing, the message “Image Drum Life” will be displayed and printing will stop. When the “Please install new Image Drum Unit.” message is displayed and printing stops, replace the image drum.

How do you clean Oki image drums?

ANSWER

1. Insert your finger into the recess on the right side of the machine and pull the front cover open lever (1) to open the front cover (2) forward.
2. Press the open button (3) and open the output tray (4).
3. Remove the image drum.
4. Wipe the light-shielding film (5) with soft tissue paper.

How do I reset my Oki printer?

All the information provided is subject to change from time to time at the sole discretion of Oki Data….To reset the printer:

1. Press and release the SEL key to take the printer off-line. The SEL light will be out.
2. Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key.
3. The printer is reset.

When should I replace my imaging drum?

You should replace it when your image quality declines and does not improve even after changing your toner. Or simply replace your drum when your printer notifies you to do so. When the replace drum light or message comes on, your printer might stop working without much notice.

How long does an imaging drum last?

Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

How do I know if I need a new imaging drum?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

How do I know if my printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

Can a laser printer drum be cleaned?

You can use a clean, lint-free cloth instead, but a toner cloth is ideal. Wipe down the exterior of the drum to remove loose toner.

How do I restore my printer to factory settings?

1. Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
2. Select “Setup” and then select “Printer Maintenance”
3. Select “Restore” and then select “Restore Factory Defaults”
4. A message appears stating that the factory defaults will be restored.

How do I reset my toner chip OKI?

Answer

1. Press Menu = printer displays “Paper Menu”
2. Press Next 4x = printer displays “System Menu”
3. Press Select 1x = printer displays “Factory Defaults”
4. Press Next 7x = printer displays “Reset Toner Life”
5. Press Select 1x = printer displays “Resetting Toner Page Count”
6. Press Ready.

Do I need to replace imaging drum?

What will happen if you reset a printer?

A factory reset will return your printer’s settings to what they were when it first came out of the box. This guide will help you reset your printer back to factory defaults.

Why is my printer in error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.