What is the size of 10 Marla house?

2250 square feet
A 10 Marla plot equals 2250 square feet/209 square meters/250 yards. The house design configuration may include single or double floors as per the requirement.

What is covered in 10 Marla house?

3,300 sq. ft.
The covered area for a double-storey 10 marla house is 3,300 sq. ft. The ground floor covers around 1,650 sq. ft.

How much does it cost to build a 10 marla house in Pakistan?

The labor cost varies as per your city and area in Pakistan. The general labor rate at the current time is 395 PKR per sqft. According to this, the estimated total labor cost for 10 Marla house will be 1,303,500 PKR.

What is the front of 10 Marla plot?

Here, a 10 marla plot starts off with a 19 x 13 garage and an 8 x 14 front lawn. The entrance opens up to four different angles, leading to a small 6 x 4 washroom, a 210 square feet drawing room, a 15 x 17 lounge, and a 144 square feet dining area that is also connected to the lounge.

What is the size of 10 marla plot?

To put it in a different perspective: a marla is 225 square feet or 25 square yards. 5 marlas are equal to 1125 square feet and 125 square yards, while 10 marlas are 2250 square feet or 250 square yards.

How long it takes to build a 10 marla house?

6 to 7 months
Depending on the availability of finances, a 10-marla house can be completed in 6 to 7 months. Approximately 60,000 bricks are required to build a 10-marla house. The entire grey structure, from foundation and the rooftop to the boundary wall, can be constructed with this many bricks.

What is the size of 10 Marla plot?

How do you calculate marla size?

1 Marla Area= 272.25 Square Feet Above is the calculation of Marla. However, you can also measure a Marla using a measuring tape or measuring rod. Compute 16.5 feet in length and 16.5 feet as a width of the land and then multiply both.