What is an SRL in fall protection?

A self-retracting lanyard, also called a self-retracting lifeline or SRL, is a vertical fall protection lifeline that allows users to easily move around while keeping consistent tautness, effectively preventing falls. The lifeline, much like the seat and shoulder belt in a car, also pulls out and retracts easily.

Can you use a lanyard with a SRL?

So, no, you cannot attach an SRL to a lanyard.

What are the most important features you look for when choosing a personal Srl aside from price?

You should always consider the specific application when choosing an SRL. Knowing the environment, the attachment point, exactly what the worker does, and the required location of the fall protection are crucial to choosing the correct SRL. There are different styles of SRLs that can be used for different applications.

What is SRL leading edge?

A leading edge SRL is a self retracting lifeline manufactured specifically to meet the ANSI Z359. 14 standard. This standard calls for specific accommodations for leading edge applications and foot-level fall events.

Can Srl be used horizontally?

Most SRLs are designed to be mounted to an overhead anchorage point. However, in many leading edge applications, overhead anchorage is not possible and the SRL is used horizontally.

Do you need a shock absorber with an SRL?

The additional shock pack that is attached to a Leading Edge SRL is not for the user, but for their SRL! That additional shock absorber is there to absorb the forces being put onto the user’s PFAS and ensure the equipment does not fail. And, in turn, the PFAS absorbs the forces that would be felt by the fall victim.

Can you use a SRL with a rope grab?

The answer / solution to the problem / question documented in this article. “Since the 8174 is a MANUAL rope grab, it can be used with an SRL. A TRAILING rope grab (8175, etc) must not be used as the trailing action can pay out the SRL which can allow the free fall to exceed 6 feet.

What are the two most important things to know for calculating fall clearance?

To determine if we have enough clearance, we must add our free fall distance plus deceleration distance, which is the amount of distance before the shock absorbing lanyard begins to slow your fall. Deceleration distance is based on a variety of factors, including: User Weight. Free fall distance.

How long is an SRL good for?

The SRL must be inspected prior to each use and annually inspected by a competent person and recertified every five years.

How do self retracting lifelines work?

A self-retracting lifeline is a type of lanyard that allows a user to move around freely within an area. The lanyard rolls out and retracts based on the user’s movement. The retracting function ensures the lifeline is always kept taut.

Which fall protection is not allowed at a leading edge?

According to OSHA’s construction fall protection standard (29 CFR 1926.501), any worker constructing a leading edge 6 feet or more above a lower level “must be protected by guardrail systems, safety net systems, or personal fall arrest systems.” The only exception is when the employer can show that using those methods …

Can you use Srl on a roof?

Again, an SRL may not be used in conjunction with a lifeline/rope grab combo. SRL’s are somewhat problematic for roofing. On many residential roofs, the slope is not steep enough to activate the brakes of an SRL. There is a tendency to slide at less than the 4 feet per second needed to engage the brake.

When using an SRL what is the best location for the anchor point?

Srls must always be anchored at or above the user’s Dorsal D-ring. IMPORTANT: It is recommended that this equipment be installed under the supervision of a qualified person, as defined by OSHA 1910.66, Appendix C.

Are shock absorbing lanyards required?

Shock absorbing lanyards are not mandatory but are often used to comply with OSHA’s Subpart M requirements. The specifications for a personal fall arrest system are in 29 CFR 1926.502(d).

What three things do you need to know to calculate fall clearance?

How to Correctly Calculate Your Fall Clearance

• Fall clearance is the distance required to prevent workers from hitting the ground or lower level, in case of a fall.
• Required Distance = Lanyard Lenght+Deceleration Distance+Height where work is happening+Safety Factor.

What makes an SRL leading edge?

In order to meet this standard, a leading edge SRL will be made of stronger cable, will feature more wear-resistant components, and it will include robust energy absorbing technology integrated into the lifeline.